1. Interior decoration: interior plastic parts, airbag system, seat belt system, front and rear seats, inner rearview mirror assembly, steering wheel, door trim panel assembly, ceiling, main and auxiliary instrument panel, interior side panel, air outlet, sunshade panel system, suitcase system, floor cushion system, shock absorber pad and other
According to the low orbit altitude and the geometric model of the satellite, we have designed a radio frequency permeable sunshade for the satellite, which can prevent light from reaching all the diffuse parts of most satellite bodies and bodies. The visor is laid flat on the chassis during launch and unfolded during satellite separation from Falcon 9. The sunscreen completely blocks the light from reaching the antenna, thus preventing the light from being reflected from the diffuse antenna. This method not only avoids the thermal effect of the darkening of the antenna surface, but also has a greater impact on the brightness reduction. As mentioned earlier, the first VisorSat prototype was launched with the eighth batch of star chains, and we will install these black mirror sunshades on all satellites after June.
Cixian County in the building to meet the design requirements of the premise, the addition of external sunshade, awning and appropriate increase in the length of the southward balcony can play a certain sunshade effect. Heat-reflecting fabric curtains coated with metal film are arranged on the inside of the window, which has a decorative effect on the front, forming a less mobile space layer about 50mm thick between the glass and the curtains. In this way, a good effect of thermal reflection and thermal insulation can be achieved, but the direct lighting is poor and should be made into a movable type. In addition, installing blinds with certain thermal reflection on the inside of the window can also obtain a certain thermal insulation effect.
Car windshield glass r780a8 glass sunshade Xiangyang car thermal insulation film can be divided into front and rear windshield film and side windshield film Among them, the front windshield has the highest requirement for thermal insulation film. According to the traffic safety regulations of the Ministry of Public Security, the light transmittance of the front windshield must be greater than 70%, on the premise that it does not affect driving safety.
Moreover, the hot weather will cause damage not only to the paint surface, but also to the car interior and dashboard. Therefore, car owners are advised to install sunshade curtains on their cars in summer. Has a very good thermal insulation effect, effectively isolate the sun, ultraviolet rays, but also can block the light and protect privacy.
Under the premise of meeting the design requirements of the building, adding external sunshades, awnings and appropriately increasing the length of the southward balcony can have a certain sunshade effect. Heat-reflecting fabric curtains coated with metal film are arranged on the inside of the window, which has a decorative effect on the front, forming a less mobile space layer about 50mm thick between the glass and the curtains. In this way, a good effect of thermal reflection and thermal insulation can be achieved, but the direct lighting is poor and should be made into a movable type. In addition, installing blinds with certain thermal reflection on the inside of the window can also obtain a certain thermal insulation effect.
Therefore, broken bridge aluminum doors and windows are widely used in office, factory, refrigeration, laboratory, instrumentation, factory buildings and other general doors and windows (heat insulated windows, dry windows and open windows are widely used). Factory doors and windows use steel doors or wooden doors as one of the main materials for fixing doors and windows. People come into contact with sawed doors and sawed doors. Saw door is the abbreviation of building door and window, and the general name of saw door is saw door head. Saw door is an important form used as window in ancient times, which is mainly used to hide the thermal insulation of large sunshade, TV cabinet and door.
When installing the rubber soft joint, the screw of the bolt should protrude the outside of the joint and tighten the bolts on the end face of each flange repeatedly and uniformly according to the method of diagonal pressure to prevent pressure deviation. Tighten the threaded joint evenly using a standard wrench. Do not use an afterburner to slide, slide or break the movable joint. In addition, it should be checked regularly to avoid loosening and causing the disc to fall off or seep. After the rubber soft joint is under pressure for the first time (such as installation, pressure testing) or before it is put back into use after long-term shutdown, it should be re-pressurized and tightened bolts before it can be put into use. When using or storing rubber flexible joints, high temperature, ozone, oil and acid-base environments should be avoided. Sunny outdoor or windward pipes should be set up sunshade. Sun, rain and wind erosion are strictly prohibited. It is forbidden to brush paint and wrap thermal insulation materials on the surface of rubber soft joints. Due to the aging of rubber products, it should be inspected and replaced in time. Return to Sohu to see more
(1) in order to avoid heatstroke during the construction period, sunshades and rest rooms should be set up at the construction sites of each shift at the construction site, and each construction personnel should be provided with a towel in each rest area. The construction personnel should go back to the rest area every 2 hours to have a rest for 15 minutes to prevent unnecessary dangerous accidents. Ice cubes, tea, towels, anti-heat medicine, etc., in the lounge.
For example, they will use solar water heaters to use solar energy instead of electricity or gas to heat water. The solar water heater consists of a smooth collector on the roof and a preheated water storage tank. The liquid is pumped into the solar collector for heating and then sent back to the heat exchanger, using the heat of the liquid to heat the water in the preheating tank. This system not only ensures a large part of the hot water supply of the building, but also has the characteristics of low-cost operation. Designers can also choose high-performance glass and sunshades to solve sunshine and heat gain problems.
At present, the open field vegetables grown in the field are kale, green vegetables, snow vegetables, mustard, cauliflower, broad beans, peas, celery, heading cabbage, yellow sprouts, carrots, onions and garlic. First, in terms of management, we should do a good job in shallow ploughing, soil cultivation, weeding, topdressing, and timely drainage after rain. Second, cauliflower, Chinese cabbage, yellow sprouts, carrots, onions and garlic can be harvested and listed in batches in time, while doing a good job of anti-freezing and heat preservation, covering the floating surface or small arch shed with straw, greenhouse film, sunshade net or non-woven cloth at night when the temperature is low, and rice straw bundles are used for heading Chinese cabbage to ensure the compactness of the ball and avoid frostbite.
